//! This module contains types used throughout the IMAP protocol.

use std::borrow::Cow;

/// From section [2.3.1.1 of RFC 3501](https://tools.ietf.org/html/rfc3501#section-2.3.1.1).
///
/// A 32-bit value assigned to each message, which when used with the unique identifier validity
/// value (see below) forms a 64-bit value that will not refer to any other message in the mailbox
/// or any subsequent mailbox with the same name forever.  Unique identifiers are assigned in a
/// strictly ascending fashion in the mailbox; as each message is added to the mailbox it is
/// assigned a higher UID than the message(s) which were added previously.  Unlike message sequence
/// numbers, unique identifiers are not necessarily contiguous.
///
/// The unique identifier of a message will not change during the session, and will generally not
/// change between sessions.  Any change of unique identifiers between sessions will be detectable
/// using the `UIDVALIDITY` mechanism discussed below.  Persistent unique identifiers are required
/// for a client to resynchronize its state from a previous session with the server (e.g.,
/// disconnected or offline access clients); this is discussed further in
/// [`IMAP-DISC`](https://tools.ietf.org/html/rfc3501#ref-IMAP-DISC).
///
/// Associated with every mailbox are two values which aid in unique identifier handling: the next
/// unique identifier value and the unique identifier validity value.
///
/// The next unique identifier value is the predicted value that will be assigned to a new message
/// in the mailbox.  Unless the unique identifier validity also changes (see below), the next
/// unique identifier value will have the following two characteristics.  First, the next unique
/// identifier value will not change unless new messages are added to the mailbox; and second, the
/// next unique identifier value will change whenever new messages are added to the mailbox, even
/// if those new messages are subsequently expunged.
///
/// > Note: The next unique identifier value is intended to provide a means for a client to
/// > determine whether any messages have been delivered to the mailbox since the previous time it
/// > checked this value.  It is not intended to provide any guarantee that any message will have
/// > this unique identifier.  A client can only assume, at the time that it obtains the next
/// > unique identifier value, that messages arriving after that time will have a UID greater than
/// > or equal to that value.
///
/// The unique identifier validity value is sent in a `UIDVALIDITY` response code in an `OK`
/// untagged response at mailbox selection time. If unique identifiers from an earlier session fail
/// to persist in this session, the unique identifier validity value will be greater than the one
/// used in the earlier session.
///
/// > Note: Ideally, unique identifiers will persist at all
/// > times.  Although this specification recognizes that failure
/// > to persist can be unavoidable in certain server
/// > environments, it STRONGLY ENCOURAGES message store
/// > implementation techniques that avoid this problem.  For
/// > example:
/// >
/// >   1. Unique identifiers are strictly ascending in the
/// >      mailbox at all times.  If the physical message store is
/// >      re-ordered by a non-IMAP agent, this requires that the
/// >      unique identifiers in the mailbox be regenerated, since
/// >      the former unique identifiers are no longer strictly
/// >      ascending as a result of the re-ordering.
/// >   2. If the message store has no mechanism to store unique
/// >      identifiers, it must regenerate unique identifiers at
/// >      each session, and each session must have a unique
/// >      `UIDVALIDITY` value.
/// >   3. If the mailbox is deleted and a new mailbox with the
/// >      same name is created at a later date, the server must
/// >      either keep track of unique identifiers from the
/// >      previous instance of the mailbox, or it must assign a
/// >      new `UIDVALIDITY` value to the new instance of the
/// >      mailbox.  A good `UIDVALIDITY` value to use in this case
/// >      is a 32-bit representation of the creation date/time of
/// >      the mailbox.  It is alright to use a constant such as
/// >      1, but only if it guaranteed that unique identifiers
/// >      will never be reused, even in the case of a mailbox
/// >      being deleted (or renamed) and a new mailbox by the
/// >      same name created at some future time.
/// >   4. The combination of mailbox name, `UIDVALIDITY`, and `UID`
/// >      must refer to a single immutable message on that server
/// >      forever.  In particular, the internal date, [RFC 2822](https://tools.ietf.org/html/rfc2822)
/// >      size, envelope, body structure, and message texts
/// >      (RFC822, RFC822.HEADER, RFC822.TEXT, and all BODY[...]
/// >      fetch data items) must never change.  This does not
/// >      include message numbers, nor does it include attributes
/// >      that can be set by a `STORE` command (e.g., `FLAGS`).
pub type Uid = u32;

/// From section [2.3.1.2 of RFC 3501](https://tools.ietf.org/html/rfc3501#section-2.3.1.2).
///
/// A relative position from 1 to the number of messages in the mailbox.
/// This position is ordered by ascending unique identifier.  As
/// each new message is added, it is assigned a message sequence number
/// that is 1 higher than the number of messages in the mailbox before
/// that new message was added.
///
/// Message sequence numbers can be reassigned during the session.  For
/// example, when a message is permanently removed (expunged) from the
/// mailbox, the message sequence number for all subsequent messages is
/// decremented.  The number of messages in the mailbox is also
/// decremented.  Similarly, a new message can be assigned a message
/// sequence number that was once held by some other message prior to an
/// expunge.
///
/// In addition to accessing messages by relative position in the
/// mailbox, message sequence numbers can be used in mathematical
/// calculations.  For example, if an untagged "11 EXISTS" is received,
/// and previously an untagged "8 EXISTS" was received, three new
/// messages have arrived with message sequence numbers of 9, 10, and 11.
/// Another example, if message 287 in a 523 message mailbox has UID
/// 12345, there are exactly 286 messages which have lesser UIDs and 236
/// messages which have greater UIDs.
pub type Seq = u32;

/// With the exception of [`Flag::Custom`], these flags are system flags that are pre-defined in
/// [RFC 3501 section 2.3.2](https://tools.ietf.org/html/rfc3501#section-2.3.2). All system flags
/// begin with `\` in the IMAP protocol.  Certain system flags (`\Deleted` and `\Seen`) have
/// special semantics described elsewhere.
///
/// A flag can be permanent or session-only on a per-flag basis. Permanent flags are those which
/// the client can add or remove from the message flags permanently; that is, concurrent and
/// subsequent sessions will see any change in permanent flags.  Changes to session flags are valid
/// only in that session.
///
/// > Note: The `\Recent` system flag is a special case of a session flag.  `\Recent` can not be
/// > used as an argument in a `STORE` or `APPEND` command, and thus can not be changed at all.
#[derive(Clone, Debug, Hash, PartialEq, Eq)]
#[non_exhaustive]
pub enum Flag<'a> {
    /// Message has been read
    Seen,

    /// Message has been answered
    Answered,

    /// Message is "flagged" for urgent/special attention
    Flagged,

    /// Message is "deleted" for removal by later EXPUNGE
    Deleted,

    /// Message has not completed composition (marked as a draft).
    Draft,

    /// Message is "recently" arrived in this mailbox.  This session is the first session to have
    /// been notified about this message; if the session is read-write, subsequent sessions will
    /// not see `\Recent` set for this message.  This flag can not be altered by the client.
    ///
    /// If it is not possible to determine whether or not this session is the first session to be
    /// notified about a message, then that message will generally be considered recent.
    ///
    /// If multiple connections have the same mailbox selected simultaneously, it is undefined
    /// which of these connections will see newly-arrived messages with `\Recent` set and which
    /// will see it without `\Recent` set.
    Recent,

    /// The [`Mailbox::permanent_flags`] can include this special flag (`\*`), which indicates that
    /// it is possible to create new keywords by attempting to store those flags in the mailbox.
    MayCreate,

    /// A non-standard user- or server-defined flag.
    Custom(Cow<'a, str>),
}

impl Flag<'static> {
    fn system(s: &str) -> Option<Self> {
        match s {
            "\\Seen" => Some(Flag::Seen),
            "\\Answered" => Some(Flag::Answered),
            "\\Flagged" => Some(Flag::Flagged),
            "\\Deleted" => Some(Flag::Deleted),
            "\\Draft" => Some(Flag::Draft),
            "\\Recent" => Some(Flag::Recent),
            "\\*" => Some(Flag::MayCreate),
            _ => None,
        }
    }

    /// Helper function to transform Strings into owned Flags
    pub fn from_strs<S: ToString>(
        v: impl IntoIterator<Item = S>,
    ) -> impl Iterator<Item = Flag<'static>> {
        v.into_iter().map(|s| Flag::from(s.to_string()))
    }
}

impl<'a> fmt::Display for Flag<'a> {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        match *self {
            Flag::Seen => write!(f, "\\Seen"),
            Flag::Answered => write!(f, "\\Answered"),
            Flag::Flagged => write!(f, "\\Flagged"),
            Flag::Deleted => write!(f, "\\Deleted"),
            Flag::Draft => write!(f, "\\Draft"),
            Flag::Recent => write!(f, "\\Recent"),
            Flag::MayCreate => write!(f, "\\*"),
            Flag::Custom(ref s) => write!(f, "{}", s),
        }
    }
}

impl<'a> From<String> for Flag<'a> {
    fn from(s: String) -> Self {
        if let Some(f) = Flag::system(&s) {
            f
        } else {
            Flag::Custom(Cow::Owned(s))
        }
    }
}

impl<'a> From<&'a str> for Flag<'a> {
    fn from(s: &'a str) -> Self {
        if let Some(f) = Flag::system(s) {
            f
        } else {
            Flag::Custom(Cow::Borrowed(s))
        }
    }
}

mod mailbox;
pub use self::mailbox::Mailbox;

mod fetch;
pub use self::fetch::Fetch;

mod name;
pub use self::name::{Name, NameAttribute};

mod capabilities;
pub use self::capabilities::Capabilities;

mod deleted;
pub use self::deleted::Deleted;

mod unsolicited_response;
pub use self::unsolicited_response::{AttributeValue, UnsolicitedResponse};

/// This type wraps an input stream and a type that was constructed by parsing that input stream,
/// which allows the parsed type to refer to data in the underlying stream instead of copying it.
///
/// Any references given out by a `ZeroCopy` should never be used after the `ZeroCopy` is dropped.
pub struct ZeroCopy<D> {
    _owned: Box<[u8]>,
    derived: D,
}

impl<D> ZeroCopy<D> {
    /// Derive a new `ZeroCopy` view of the byte data stored in `owned`.
    ///
    /// # Safety
    ///
    /// The `derive` callback will be passed a `&'static [u8]`. However, this reference is not, in
    /// fact `'static`. Instead, it is only valid for as long as the `ZeroCopy` lives. Therefore,
    /// it is *only* safe to call this function if *every* accessor on `D` returns either a type
    /// that does not contain any borrows, *or* where the return type is bound to the lifetime of
    /// `&self`.
    ///
    /// It is *not* safe for the error type `E` to borrow from the passed reference.
    pub(crate) unsafe fn make<F, E>(owned: Vec<u8>, derive: F) -> Result<Self, E>
    where
        F: FnOnce(&'static [u8]) -> Result<D, E>,
    {
        use std::mem;

        // the memory pointed to by `owned` now has a stable address (on the heap).
        // even if we move the `Box` (i.e., into `ZeroCopy`), a slice to it will remain valid.
        let _owned = owned.into_boxed_slice();

        // this is the unsafe part -- the implementor of `derive` must be aware that the reference
        // they are passed is not *really* 'static, but rather the lifetime of `&self`.
        let static_owned_ref: &'static [u8] = mem::transmute(&*_owned);

        Ok(ZeroCopy {
            _owned,
            derived: derive(static_owned_ref)?,
        })
    }

    /// Take out the derived value of this `ZeroCopy`.
    ///
    /// Only safe if `D` contains no references into the underlying input stream (i.e., the `owned`
    /// passed to `ZeroCopy::new`).
    #[allow(dead_code)]
    pub(crate) unsafe fn take(self) -> D {
        self.derived
    }
}

use super::error::Error;
pub(crate) type ZeroCopyResult<T> = Result<ZeroCopy<T>, Error>;

use std::ops::Deref;
impl<D> Deref for ZeroCopy<D> {
    type Target = D;
    fn deref(&self) -> &Self::Target {
        &self.derived
    }
}

// re-implement standard traits
// basically copied from Rc

impl<D: PartialEq> PartialEq for ZeroCopy<D> {
    fn eq(&self, other: &ZeroCopy<D>) -> bool {
        **self == **other
    }
}
impl<D: Eq> Eq for ZeroCopy<D> {}

use std::cmp::Ordering;
impl<D: PartialOrd> PartialOrd for ZeroCopy<D> {
    fn partial_cmp(&self, other: &ZeroCopy<D>) -> Option<Ordering> {
        (**self).partial_cmp(&**other)
    }
    fn lt(&self, other: &ZeroCopy<D>) -> bool {
        **self < **other
    }
    fn le(&self, other: &ZeroCopy<D>) -> bool {
        **self <= **other
    }
    fn gt(&self, other: &ZeroCopy<D>) -> bool {
        **self > **other
    }
    fn ge(&self, other: &ZeroCopy<D>) -> bool {
        **self >= **other
    }
}
impl<D: Ord> Ord for ZeroCopy<D> {
    fn cmp(&self, other: &ZeroCopy<D>) -> Ordering {
        (**self).cmp(&**other)
    }
}

use std::hash::{Hash, Hasher};
impl<D: Hash> Hash for ZeroCopy<D> {
    fn hash<H: Hasher>(&self, state: &mut H) {
        (**self).hash(state);
    }
}

use std::fmt;
impl<D: fmt::Display> fmt::Display for ZeroCopy<D> {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        fmt::Display::fmt(&**self, f)
    }
}
impl<D: fmt::Debug> fmt::Debug for ZeroCopy<D> {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        fmt::Debug::fmt(&**self, f)
    }
}

impl<'a, D> IntoIterator for &'a ZeroCopy<D>
where
    &'a D: IntoIterator,
{
    type Item = <&'a D as IntoIterator>::Item;
    type IntoIter = <&'a D as IntoIterator>::IntoIter;
    fn into_iter(self) -> Self::IntoIter {
        (**self).into_iter()
    }
}